Summary

The Manrose MixFlo 100T is a robust mixed flow fan, that has been designed primarily for applications that might require higher airflow, as well as providing lower sound levels at just 24db(A). Instead of being located directly in the bathroom, this fan sits in the loft or ceiling void above the bathroom and therefore all you would see on the ceiling would be the grill.

The MF100T, as well as any of the MF100 series, can be mounted in a number of different applications and is suitable for use with either flexible or rigid ducting.

To top this off, the Manrose MF100T fan can be ducted from any bathroom zone and can be ducted all the way up to 10 metres without loss of power.

Main Features

• Our Rating: 9.3/10
• SFP: 0.37W/l/s
• Maximum Sound Level: 24dB
• No electrics in the bathroom as in the loft above
• Maximum Flow Rate: 68 litres per second
• Double Insulation – no earth required
• Fully Building Code compliant
• Fully BEAB approved rated to IPX
• Has three settings for speed, H, M and L
• 3 Year Warranty

Extraction Rate

The Manrose MF100T although a quiet fan, has an excellent maximum extraction flow rate of 245m3/hr, approximately 68 litres per second.

There are three different configurable speeds High, Medium and Low, each with varying RPM, Wattage, dB etc, as indicated in the table below. The speed of this fan is set using a jumper and pins found directly under the cover.

Power Consumption

This in-line fan runs between 1,700 RPM to 2,400 RPM and the motor runs at a maximum consumption of 25 Watts, depending on the setting you go for (see table above). Although the wattage may seem higher than some other models on the market, you have to remember that this is a very powerful fan. It also has a moderate SFP Efficiency Rate of just 0.37W/l/s, ensuring that this fan runs smoothly and efficiently.

Noise Level

The Manrose MF100T runs at a low noise level of just 24dB at 3 metres on the “High” setting and just 20dB at 3 metres on the “Low” setting. This is incredibly quiet, especially when this is probably the most powerful 100mm extractor fan currently.

Material

This extractor fan was manufactured from top-quality ABS thermoplastics, selected for their long-lasting robustness. This will ensure that the MF100T will work for a very long time. ABS thermoplastic is a great choice for bathroom extractor fans because it is a durable material that can withstand high levels of moisture and humidity.

Humidity Sensor

The MF100T does NOT have a humidity sensor or humidistat, and unfortunately, the use of a humidity sensor is not actually possible with this model. If this is something you are after, you will need to get, instead, the MF100S as well as the Manrose 1361 Remote Humidistat and Timer.

Warranty

This extractor fan by Manrose features a 3-year warranty or 30,000 hours. They have a dedicated technical support line on their website if you have any questions.

Manrose MF100T Reviews

The Manrose MF100T has been reviewed many times by verified customers that have provided genuine feedback. Click below to read the verified customer reviews in order to make an informed decision.

Manrose MF100T Extractor Fan Instruction Manual

You can download the Manrose MF100T Extractor Fan Instruction Manual here.

You can also download the Manrose MF100T Datasheet here.

What’s Included in the box?

• 1 x MF100T Fan
• 1 x Instruction User Manual

Pros and Cons

Verdict: Should You Buy The MF100T?

If you’re after a top-rated, moderately priced, in-duct mounted mixed flow fan, with an excellent extraction rate all while running very quietly, then you should definitely consider getting the MF100T.

As this model is incredibly easy to install, it comes as no surprise that this extractor fan at the time of writing has an average of 4.5 stars from lots of reviews online.

Featured in:

Best Inline Extractor Fans

Best Bathroom Extractor Fans

Best Silent Bathroom Extractor Fans

Where Should I Purchase The Manrose MF100T?

Manrose MF100T Additional Specifications

The post Manrose MF100T Review appeared first on Extractors Fan.

Summary

The Manrose CF200H follows on from the CF100 range and is another top centrifugal fan. It supplies an even more mighty, vibration-free extraction rate in your application of choice. This model has been designed primarily for applications that would require longer ducting runs.

The CF200H works great against the usual pressures of long ducts as well as any grill resistance. It comes fitted with a built-in back flap in the discharge spigot region to drastically reduce the chance of any backdraughts occurring.

This fan is suitable for bathrooms, utility rooms, cloakrooms, toilets, etc.

Main Features

• Our Rating: 8.8/10
• Maximum Sound Level: 42dB
• Perfect for longer ducting
• Wall or ceiling mounted
• Backdraught Flap
• Adjustable Overrun Timer
• Humidity Sensor
• Maximum Flow Rate: 31 litres per second (110m³/hr)
• Double Insulation – no earth required
• Building Regulations on Ventilation (F1) compliant
• IP44 Rated
• 3 Year Warranty

Extraction Rate

The Manrose CF200H has a moderate extraction flow rate of 110m3/hr, around 31 litres per second. While this extractor fan doesn’t have the highest extraction rate out there, this is to be anticipated as this fan’s manufacture was intended for extracting airflow over longer duct runs.

Power Consumption

This centrifugal fan by Manrose operates at 1,400 RPM and the motor itself runs at 17 Watts. Although the wattage and RPM are lower than the CF100 series, it has a larger pressure of 120 p.a and will extract a lot more airflow and moisture.

Noise Level

The Manrose CF200H outputs a noise level of around 45dB at 3 metres distance. This is not the low volume fan around but, keep in mind, as mentioned earlier, this is a strong extractor fan and it will get the job done. 

Design

This fan was manufactured from durable and high-quality ABS plastics, selected for its long-lasting robustness. It also means cleaning is easier, ensuring that the CF200H will operate well for a great deal of time.

One thing to point out is, via a customer’s comments, is that if you are replacing an existing Manrose extractor fan, the mounting points will likely not be in the same place. In this particular example, the customer was reviewing the Manrose QF100H, which has completely different mounting points than this CF200H model, especially as the CF200H is quite a deal larger than the other models in the series.

On the topic of its size, as seen in the various images on the page, it isn’t a square shape like most other extractor fans, but rather a large rectangular shape. This is important to keep in mind when you are planning its location.

With regard to its motor, it features a single-phase induction motor with bearings that are pre-oiled. This decreases the need for any maintenance while also making sure that it will last much longer.

Humidistat

Additionally, as with all Manrose unit numbers, the “H” means this model has a built-in humidistat or humidity sensor. This humidity control is fully adjustable from 40%RH to 90%RH. It is usually advisable to configure the humidistat before you have installed the fan.

In order to set it, ensure that the power is turned off first! Then you need to first take off the wiring cover.  Next, insert a small flat-headed screwdriver and gently twist anti-clockwise to increase the time, and clockwise to reduce. Just like the run-on timer, customers have commented that it is sensitive, so take care when adjusting it.

Related: Best Humidistat Extractor Fan

Warranty

This extractor fan by Manrose features a 3-year warranty or 30,000 hours. They have a dedicated technical support line on their website if you have any questions.

Manrose CF200H Reviews

The Manrose CF200H has been reviewed many times by verified customers that have provided genuine feedback. Click below to read the verified customer reviews in order to make an informed decision.

Manrose CF200H Extractor Fan Instruction Manual

You can download the Manrose CF200H Extractor Fan Instruction Manual here.

You can also download the Manrose CF200H Datasheet here.

What’s Included in the box?

• 1 x CF200H Fan
• 1 x Instruction User Manual

Pros and Cons

Verdict: Should You Buy The CF200H?

And that concludes our review! If you’re after an even more powerful centrifugal fan by Manrose, moderately priced, with a great extraction rate AND both a Humidity Sensor and Overrun Timer, then you should definitely consider getting the Manrose CF200H as your replacement extractor fan. One consideration to keep in mind is that this unit is bigger than other models and you will need to factor this in with the compatibility of the aesthetics of your bathroom.

If you think you’ll need a smaller version of this fan, be sure to check out our full Manrose CF100H review.

Additionally, they also make this model without a humidity sensor – if this is of interest definitely check out our Manrose CF200T review.

Where Should I Purchase The Manrose CF200H?

Manrose CF200H Additional Specifications

The post Manrose CF200H Review appeared first on Extractors Fan.

Summary

The Manrose MixFlo 100S is the first of the MixFlo series. This mixed flow fan was mainly designed for higher airflow applications where you might prefer a quieter sound. Where most bathroom extractor fans are located inside the bathroom, the MF100S is installed in the loft or ceiling void above, meaning there are no electrics in the bathroom.

The MF100S, including all of the MF100 series, can be mounted in a variety of applications and is appropriate for flexible or rigid ducting.

To make things even better, the Manrose MF100S fan can be ducted from any electrical bathroom zone and can be ducted all the way up to 10 metres without any loss of power.

Main Features

• Our Rating: 9.3/10
• SFP: 0.37W/l/s
• Maximum Sound Level: 24dB
• No electrics in the bathroom as in the loft above
• Maximum Flow Rate: 68 litres per second
• Double Insulation – no earth required
• Fully Building Code compliant
• Fully BEAB approved rated to IPX4

Extraction Rate

The Manrose MF100S has a superior maximum extraction flow rate of 245m3/hr, which is around 68 litres per second. MF stands for “Mixed Flow” which describes the combination the airflow technology both an axial and centrifugal impeller.

This speed will depend upon which setting you choose; H (High), M (Medium) and L (Low). The speed of this fan is set using a jumper and pins found underneath the cover.

Power Consumption

Depending on the mode you select, this inline duct fan runs from 1,700 RPM up to 2,400 RPM, and the motor runs at a maximum consumption rate of 25 Watts. Even though the wattage might seem higher than some other extractor fans on the market, it is important to note that this is a very powerful fan. It also has a decent SFP Efficiency Rate of 0.37W/l/s, ensuring that this extractor runs smoothly and efficiently.

Noise Level

The Manrose MF100S outputs a very low sound of just 24dB at 3m on the “H” setting, and just 20dB at 3 metres on the “L” setting. This is incredibly quiet, especially for such a powerful extractor fan.

Material

This extractor fan was manufactured from quality ABS thermoplastics, chosen for their long-lasting strength. This will ensure that the MF100S will run efficiently for a very long time to come.

Humidity Sensor

The MF100S does NOT have a humidity sensor or humidistat, unfortunately. If this is something you want, you will need to get the Manrose 1361 Remote Humidistat & Timer as well.

Warranty

This extractor fan by Manrose features a 3-year warranty or 30,000 hours. They have a dedicated technical support line on their website if you have any questions.

Manrose MF100S Reviews

The Manrose MF100S has been reviewed many times online by verified customers that have provided genuine feedback. Click below to read the verified customer reviews in order to make an informed decision.

Manrose MF100S Extractor Fan Instruction Manual

You can download the Manrose MF100S Extractor Fan Instruction Manual here.

You can also download the Manrose MF100S Datasheet here.

What’s Included in the box?

• 1 x MF100S Fan
• 1 x Instruction User Manual

Pros and Cons

Verdict: Should You Buy The MF100S?

If you’re after a powerful, decently priced, inline mounted mixed flow fan, with an outstanding extraction rate – all whilst running super quietly, you should certainly keep the MF100S in mind. As this unit is extremely simple to install, it’s no surprise that many customers have rated this fan highly online.

Where Should I Purchase The Manrose MF100S?

Manrose MF100S Additional Specifications

The post Manrose MF100S Review appeared first on Extractors Fan.

Summary

The Manrose Quiet Fan 100H is declared by the manufacturer to be a current top domestic extractor fan that comprises a higher extraction rate, whilst also simultaneously outputting a very low decibel sound while it is running. It is the ideal choice for bathrooms, showers and toilets and is designed for wall mounting and ceiling mounting.

To make things even better, the Manrose QF100H fan includes a turning vane system, located in the spigot, which is designed to improve its overall running performance by retaining a continuously high output.

Main Features

• Our Rating: 9.3/10
• SFP: 0.24W/l/s
• Sound Level: 27dB
• Flow Rate: 21 litres per second
• Controlled with Humidity sensor or Overrun timer
• Weight: 80g
• Features integral backdraught shutters
• Complies with both Part F & L
• Unique turning vane technology

Check price on Amazon

Extraction Rate

The Manrose QF100H while it runs quietly, has an excellent extractor rate of 75m3/hr, which is roughly 21 (20.8) litres per second. Compared to the standard axial fan available, this is pretty good.

Power Consumption

Although this fan runs at a fairly decent speed of 2,300 r.p.m, this fan contains a low energy-consuming motor with a maximum consumption of 4.8 Watts. It also has a low SFP of just 0.24W/l/s, ensuring that this fan runs efficiently.

Noise Level

The Manrose QF100H runs at a low decibel level of just 27dB at 3 metres. The manufacturer has cited that this is over a 60% reduction in comparison to the standard 4-inch 100mm domestic extractor fans available on the market today.

Material

This extractor fan was created using top-quality ABS thermoplastics, chosen for their robust strength and durableness. This will ensure that the QF100H will last for a long time in your bathroom or shower room.

Overrun Timer

Just like the QF100T, this unit features a timer module that is adjustable. The run-on timer starts from 60 seconds and goes all the way up to 20 minutes. It is advisable that you configure the overrun timer before you install the fan, as it is easier to do so.

In order to set it to your desired time, the overrun time regulator itself has a small opening for a screwdriver. Because it is located at the top of the unit, if you wish to change the setting after installation, you can remove the front cover – there are small caps that cover the screw heads that some customers find easy to miss. Simply twist gently until you reach the timing of your choice.

Check price on Amazon

Humidity Sensor

As well as the timer control, the QF100H also features a humidistat, which is adjustable from 40% RH to 95% RH. Having a humidistat is perfect for those that find their bathroom or shower is quite humid for long periods of time.

Warranty

This Manrose extractor fan is warranted at 30,000 hours or 3 years. They also have dedicated technical support contacts on their website if you have any queries or issues.

Manrose QF100H Reviews

The Manrose QF100H has been reviewed many times by verified customers that have provided genuine feedback. Click below to read the verified customer reviews in order to make an informed decision.

Manrose QF100H Extractor Fan Instruction Manual

You can download the Manrose QF100H Extractor Fan Instruction Manual here.

You can also download the Manrose QF100H Datasheet here.

What’s Included in the box?

• 1 x QF100H Fan
• 1 x Instruction User Manual

Pros and Cons

Verdict: Should You Buy The QF100H?

If you’re after a decently priced axial fan, with a good extraction rate all while running quietly, then the QF100H is the only extractor you need. It is energy efficient and comes with two modes of control – the timer and the integral humidistat, making this fan great value for money.

Where Should I Purchase The Manrose QF100H?

Manrose QF100H Additional Specifications

The post Manrose QF100H Review appeared first on Extractors Fan.

Summary

The Manrose Quiet Fan 100T is proclaimed to be one of the latest domestic extractor fans that incorporates a higher extraction rate than most, whilst also simultaneously producing an extremely low volume sound while extracting. It is the ideal choice for bathrooms, shower rooms and toilets, designed for wall or/and ceiling mounting.

To top this off, the Manrose QF100T fan includes a turning vane system, found in the spigot, designed to improve performance by maintaining a consistently high output.

Main Features

• Our Rating: 9.3/10
• SFP: 0.24W/l/s
• Sound Level: 27dB
• Flow Rate: 21 litres per second
• Weight: 80g
• Features integral backdraught shutters
• Complies with both Part F & L
• Unique turning vane technology

Extraction Rate

The Manrose QF100T although a quiet fan, has an excellent extractor flow rate of 75m3/hr, approximately 21 (20.8) litres per second. Compared to the standard axial fan, this is pretty good.

Power Consumption

Although this fan runs at a fairly decent speed of 2,300 r.p.m, this fan contains a low energy consuming motor with a maximum consumption of 4.8 Watts. It also has a low SFP of just 0.24W/l/s, ensuring that this fan runs efficiently.

Noise Level

The Manrose QF100T runs at a low decibel level of just 27dB at 3 metres. The manufacturer claims that this is over a 60% reduction when compared to the standard 4-inch 100mm domestic extractor fans available on the market currently.

Material

This extractor fan was manufactured by using high-quality ABS thermoplastics due to their robust strength and durableness. This will ensure that the QF100T will last the test of time in your bathroom.

Overrun Timer

As the model number suggests, this unit features a timer module that is adjustable. The run-on timer goes down from 60 seconds all the way up to 20 minutes. It is easiest to set the overrun timer before you install the fan.

In order to configure it, the overrun time regulator itself has a small opening for a screwdriver. Because it is located at the top of the unit, if you wish to change the setting after installation, you can remove the front cover – there are small caps internally that cover the screw heads that may be easy to miss.

Check price on Amazon

Humidity Sensor

The QF100T does NOT have a humidity sensor or humidity control. If this is something you are after, you will need the Manrose QF100H.

Warranty

This extractor fan by Manrose features a 3-year warranty or 30,000 hours. They have a dedicated technical support line on their website if you have any questions.

Manrose QF100T Reviews

The Manrose QF100T has been reviewed many times by verified customers that have provided genuine feedback. Click below to read the verified customer reviews in order to make an informed decision.

Manrose QF100T Extractor Fan Instruction Manual

You can download the Manrose QF100T Extractor Fan Instruction Manual here.

You can also download the Manrose QF100T Datasheet here.

What’s Included in the box?

• 1 x QF1000T Fan
• 1 x Instruction User Manual

Pros and Cons

Verdict: Should You Buy The QF100T?

If you’re after a decently priced axial fan, with a good extraction rate all while running quietly, then the QF100T is the only extractor fan you need.

As this model is great value for money and relatively easy to install, it comes as no surprise that this extractor fan has so many excellent reviews online.

Where Should I Purchase The Manrose QF100T?

Manrose QF100T Additional Specifications

The post Manrose QF100T Review appeared first on Extractors Fan.

Summary

The Manrose CF200T follows on from the CF100 range and is another great centrifugal fan. It provides an even more powerful, vibration-free airflow extraction in your chosen room. This model has been designed mainly for applications that would require longer ducting runs.

The CF200T works great against the usual pressures of long ducts as well as any grill resistance. It comes fitted with a built-in flap in the discharge spigot area to dramatically reduce the likelihood of any backdraughts.

This fan is suitable for bathrooms, utility rooms, cloakrooms, toilets, etc.

Main Features

• Our Rating: 9/10
• Maximum Sound Level: 42dB
• Perfect for longer ducting
• Wall or ceiling mounted
• Backdraft Flap
• Adjustable Overrun Timer
• Maximum Flow Rate: 31 litres per second (110m³/hr)
• Double Insulation – no earth required
• Building Regulations on Ventilation (F1) compliant
• IP44 Rated
• 3 Year Warranty

Extraction Rate

The Manrose CF200T has a decent extraction rate of 110m3/hr, approximately 31 litres per second. While this fan does not have the highest extraction rate out there, this is to be expected as this fan’s design is intended for extracting air over longer duct runs than usual.

Power Consumption

This centrifugal fan runs at 1,400 RPM and the motor runs at a consumption of 17 Watts. Although the wattage and RPM is lower than the CF100T, it has a higher pressure of 120 p.a and will extract a lot more moisture and airflow.

Noise Level

The Manrose CF200T outputs a noise volume of around 45dB at 3 metres. This is not the quietest fan and you will notice it – especially if you are changing from a typical axial fan that you’d get in a bathroom. But keep in mind, as mentioned above, this is a powerful fan and will get the job done. 

Design

This extractor fan was manufactured from high-quality ABS, chosen for its long-lasting strength. It also allows for easy cleaning, ensuring that the CF200T will work well for a long period of time.

One thing to mention, as pointed out by a customer, is that if you are replacing an existing Manrose extractor fan, the mounting points will likely not be in the same place. In this particular example, the customer was reviewing the Manrose QF100H, which has completely different mounting points than this CF200T model, especially as it is larger than other models.

On the subject of its size, it isn’t a square like most other extractor fans out there but a larger rectangular shape. This is important to keep in mind when you are planning the location for your chosen application.

With regard to its motor, it features a single-phase induction motor with bearings that are pre-oiled. This reduces the need for any maintenance while also ensuring that it will last the test of time.

Overrun Timer

As with all Manrose model numbers, the “T” means this unit features an overrun timer module. This run-on timer starts from 1 minute up to 20 minutes. It is usually best to set the overrun timer before you have installed the fan.

Warranty

This extractor fan by Manrose features a 3-year warranty or 30,000 hours. They have a dedicated technical support line on their website if you have any questions.

Manrose CF200T Reviews

The Manrose CF200T has been reviewed many times by verified customers that have provided genuine feedback. Click below to read the verified customer reviews in order to make an informed decision.

Manrose CF200T Extractor Fan Instruction Manual

You can download the Manrose CF200T Extractor Fan Instruction Manual here.

You can also download the Manrose CF200T Datasheet here.

What’s Included in the box?

• 1 x CF200T Fan
• 1 x Instruction User Manual

Pros and Cons

Verdict: Should You Buy The CF200T?

And that concludes this review! If you’re after an even more powerful centrifugal fan by Manrose, moderately priced, with a great extraction rate, then you should definitely consider the CF200T as your replacement fan. One consideration to keep in mind is that this model is larger than others and you will need to factor in the compatibility with regard to the aesthetics of your bathroom.

If you think you’ll need a smaller fan, you should check out our full Manrose CF100T review.

Additionally, they also make this model with a humidity sensor. If this sounds like something you want in an extractor fan, be sure to check out our Manrose CF200H review.

Where Should I Purchase The Manrose CF200T?

Manrose CF200T Additional Specifications

The post Manrose CF200T Review appeared first on Extractors Fan.

Summary

The Manrose CF100T is an excellent centrifugal fan that provides a powerful, yet quiet, and vibration-free airflow extraction. This model has been designed primarily for applications that would usually require air to be moved long distances as seen in the second diagram but also can be practically installed as seen in the first diagram.

The CF100T works extremely well against the pressures of long ducts and grill resistance. It comes fitted with a built-in spring-operated flap in the discharge spigot to cancel any backdraughts from occurring.

This fan is perfect for ­applications including utility rooms, cloakrooms, bathrooms, toilets, etc.

Main Features

• Our Rating: 8.9/10
• Maximum Sound Level: 42dB
• Moves air long distances
• Wall or ceiling mounted
• Backdraft Flap
• Adjustable Overrun Timer
• Maximum Flow Rate: 25 litres per second (90m³/hr)
• Double Insulation – no earth required
• Building Regulations on Ventilation (F1) compliant
• IP44 Rated
• 3 Year Warranty

Extraction Rate

The Manrose CF100T has a decent maximum extraction flow rate of 90m3/hr, approximately 25 litres per second. While this fan does not have the highest extraction rate out there, this is to be expected as this fan’s design is intended for pushing air over longer duct runs.

Power Consumption

This centrifugal fan runs at 1,600 RPM and the motor runs at a maximum consumption of 20 Watts. Although the wattage may seem higher than some other models on the market, you have to remember that this is a powerful fan and is fairly standard for a centrifugal fan.

Noise Level

The Manrose CF100T outputs a noise volume of around 42dB at 3 metres. This is not the quietest fan and you will notice it – especially if you are changing from a typical axial fan. But keep in mind, as mentioned above, this is a powerful fan and will get the job done. 

Design

This extractor fan was manufactured from top-quality ABS thermoplastics, selected for its long-lasting robustness. It also allows for easy cleaning, ensuring that the CF100T will work well for a very long time.

The motor itself is a single-phase induction motor and the bearings are pre-oiled. This reduces any requirement for maintenance while also ensuring that it will run for a long time.

One thing to note, as indicated by a customer, is that if you are replacing an existing Manrose extractor fan, the mounting points may not be in the same place. In this instance, the customer had the Manrose QF100T, which has different mounting points than this CF100T model.

Overrun Timer

Warranty

This extractor fan by Manrose features a 3-year warranty or 30,000 hours. They have a dedicated technical support line on their website if you have any questions.

Manrose CF100T Reviews

The Manrose CF100T has been reviewed many times by verified customers that have provided genuine feedback. Click below to read the verified customer reviews in order to make an informed decision.

Manrose CF100T Extractor Fan Instruction Manual

You can download the Manrose CF100T Extractor Fan Instruction Manual here.

You can also download the Manrose CF100T Datasheet here.

What’s Included in the box?

• 1 x CF100T Fan
• 1 x Instruction User Manual

Pros and Cons

Verdict: Should You Buy The CF100T?

That concludes our review! If you’re after a powerful centrifugal fan, manufactured by Manrose, a trusted brand, moderately priced, with a good extraction rate, you should definitely consider the CF100T as your next extractor fan. As this model is easy to install, it comes as no surprise that, at the time of posting, this fan has an average score of 4.5 stars online.

If you think you’ll need a larger, more robust fan, you should check out our full Manrose CF200T review.

Additionally, they also make the same version and a bigger version in this series with a humidity sensor. If this sounds like something you want from an extractor fan, be sure to check out both our Manrose CF100H review and Manrose CF200H review.

Where Should I Purchase The Manrose CF100T?

Manrose CF100T Additional Specifications

The post Manrose CF100T Review appeared first on Extractors Fan.

Summary

The Manrose CF100H is an excellent centrifugal fan that provides a powerful, yet quiet, and vibration-free airflow extraction. This model has been designed primarily for applications that would usually require air to be moved long distances as seen in the second diagram but also can be practically installed as seen in the first diagram.

The CF100H works extremely well against the pressures of long ducts and grill resistance. It comes fitted with a built-in spring-operated flap in the discharge spigot to cancel any backdraughts from occurring.

This fan is perfect for ­applications including utility rooms, cloakrooms, bathrooms, toilets, etc.

Main Features

• Maximum Sound Level: 42dB
• Moves air long distances
• Wall or ceiling mounted
• Backdraft Flap
• Adjustable Overrun Timer
• Maximum Flow Rate: 25 litres per second (90m³/hr)
• Double Insulation – no earth required
• Building Regulations on Ventilation (F1) compliant
• IP44 Rated
• 3 Year Warranty

Extraction Rate

The Manrose CF100H has a decent maximum extraction flow rate of 90m3/hr, approximately 25 litres per second. While this fan does not have the highest extraction rate out there, this is to be expected as this fan’s design is intended for pushing air over longer duct runs.

Power Consumption

This centrifugal fan runs at 1,600 RPM and the motor runs at a maximum consumption of 20 Watts. Although the wattage may seem higher than some other models on the market, you have to remember that this is a powerful fan and is fairly standard for a centrifugal fan.

Noise Level

The Manrose CF100H outputs a noise volume of around 42dB at 3 metres. This is not the quietest bathroom fan and you will notice it – especially if you are changing from a typical axial fan. But keep in mind, as mentioned above, this is a powerful fan and will get the job done. 

Design

This extractor fan was manufactured from top-quality ABS thermoplastics, selected for its long-lasting robustness. It also allows for easy cleaning, ensuring that the CF100H will work well for a very long time.

The motor itself is a single-phase induction motor and the bearings are pre-oiled. This reduces any requirement for maintenance while also ensuring that it will run for a long time.

One thing to note, as indicated by a customer, is that if you are replacing an existing Manrose extractor fan, the mounting points may not be in the same place. In this instance, the customer had the Manrose QF100T, which has different mounting points than this CF100H model.

With regard to its motor, it features a single-phase induction motor with bearings that are pre-oiled. This decreases the need for any maintenance while also making sure that it will last much longer.

Humidistat

Additionally, as with all Manrose models, any with an “H” means they have a built-in humidity sensor or humidistat. This humidity control is fully adjustable from 40%RH to 90%RH. It is usually advisable to configure the humidistat before you have installed it.

In order to configure it, make sure the power is turned off first! Next, you need to take off the wiring cover. Then, insert a small flat-headed screwdriver and gently twist anti-clockwise to increase the time, and clockwise to reduce. Just like the run-on timer, customers have commented that it is sensitive, so take care when adjusting it.

Related: Best Humidistat Extractor Fan

Warranty

This centrifugal extractor fan by Manrose features a 3-year warranty or 30,000 hours. They have a dedicated technical support line on their website if you have any questions.

Manrose CF100H Reviews

The Manrose CF100H has been reviewed many times by verified customers that have provided genuine feedback. Click below to read the verified customer reviews in order to make an informed decision.

Manrose CF100H Extractor Fan Instruction Manual

You can download the Manrose CF100H Extractor Fan Instruction Manual here.

You can also download the Manrose CF100H Datasheet here.

What’s Included in the box?

• 1 x CF100H Fan
• 1 x Instruction User Manual

Pros and Cons

Verdict: Should You Buy The CF100H?

That concludes our review! If you’re after a powerful centrifugal fan, manufactured by Manrose, a trusted brand, moderately priced, with a good extraction rate, you should definitely consider the CF100H as your next extractor fan. I personally like the fact that it comes with both timer and humidistat control options.

If for some reason you’d like this model without the humidistat option, take a look at our Manrose CF100T review.

Also, on the other hand, if you think you’ll need a larger, more robust fan, you should check out our full Manrose CF200T review.

Additionally, they also make the bigger version in this series with a humidity sensor. If this sounds like something you want from an extractor fan, be sure to check out our Manrose CF200H review.

Where Should I Purchase The Manrose CF100H?

Manrose CF100H Additional Specifications

The post Manrose CF100H Review appeared first on Extractors Fan.