Manrose MF100T Review

Manrose MF100T

9.3

Price

9.4/10

Extraction Rate

9.2/10

Sound Level

9.4/10

Ease to Install

9.2/10

Warranty & Support

9.4/10

Pros

  • Customers have said it is very easy to install.
  • Provides a very high extraction rate whilst producing just a quiet amount of noise.
  • The product is covered with a 3-year warranty for peace of mind.
  • Extracts 68 litres of airflow per second.
  • Has three settings for speed, H, M and L.

Cons

  • Configuring the timer may be tricky as there are no markings to indicate the time. With that said, once set you won’t need to change it ever again.

Summary

The Manrose MixFlo 100T is a robust mixed flow fan, that has been designed primarily for applications that might require higher airflow, as well as providing lower sound levels at just 24db(A). Instead of being located directly in the bathroom, this fan sits in the loft or ceiling void above the bathroom and therefore all you would see on the ceiling would be the grill.

The MF100T, as well as any of the MF100 series, can be mounted in a number of different applications and is suitable for use with either flexible or rigid ducting.

To top this off, the Manrose MF100T fan can be ducted from any bathroom zone and can be ducted all the way up to 10 metres without loss of power.

Main Features

  • Our Rating: 9.3/10
  • SFP: 0.37W/l/s
  • Maximum Sound Level: 24dB
  • No electrics in the bathroom as in the loft above
  • Maximum Flow Rate: 68 litres per second
  • Double Insulation – no earth required
  • Fully Building Code compliant
  • Fully BEAB approved rated to IPX4

Extraction Rate

The Manrose MF100T although a quiet fan, has an excellent maximum extraction flow rate of 245m3/hr, approximately 68 litres per second.

There are three different configurable speeds High, Medium and Low, each with varying RPM, Wattage, dB etc, as indicated in the table below. The speed of this fan is set using a jumper and pins found directly under the cover.

Power Consumption

This in-line fan runs between 1,700 RPM to 2,400 RPM and the motor runs at a maximum consumption of 25 Watts, depending on the setting you go for (see table above). Although the wattage may seem higher than some other models on the market, you have to remember that this is a very powerful fan. It also has a moderate SFP Efficiency Rate of just 0.37W/l/s, ensuring that this fan runs smoothly and efficiently.

Noise Level

The Manrose MF100T runs at a low noise level of just 24dB at 3 metres on the “High” setting and just 20dB at 3 metres on the “Low” setting. This is incredibly quiet, especially for such a powerful extractor fan.

Material

This extractor fan was manufactured from top-quality ABS thermoplastics, selected for their long-lasting robustness. This will ensure that the MF100T will work for a very long time.

Overrun Timer

As the “T” in the model number suggests, this unit features an adjustable timer module. The run-on timer starts from 60 seconds all the way up to 20 minutes. It is easiest to set the overrun timer before you install the fan.

In order to configure it, you need to remove the wiring cover. Next, you need to gently turn the potentiometer until you are happy with the time you have set. It is very sensitive in that just a small twist will greatly affect the timing set.

Humidity Sensor

The MF100T does NOT have a humidity sensor or humidistat, and unfortunately, the use of a humidity sensor is not actually possible with this model. If this is something you are after, you will need to get, instead, the MF100S as well as the Manrose 1361 Remote Humidistat and Timer.

Warranty

This extractor fan by Manrose features a 3-year warranty or 30,000 hours. They have a dedicated technical support line on their website if you have any questions.

Manrose MF100T Reviews

The Manrose MF100T has been reviewed over 1,800+ times by verified customers that have provided genuine feedback.

Manrose MF100T Extractor Fan Instruction Manual

What's Included in the box?

  • 1 x MF100T Fan
  • 1 x Instruction User Manual

Pros and Cons

PROS

  • Customers have said it is very easy to install.
  • Provides a very high extraction rate whilst producing just a quiet amount of noise.
  • The product is covered with a 3-year warranty for peace of mind.
  • Extracts 68 litres of airflow per second.
  • Has three settings for speed, H, M and L.

CONS

  • Configuring the timer may be tricky as there are no markings to indicate the time. With that said, once set you won’t need to change it ever again.

Should You Buy This Unit - Verdict

If you’re after a top-rated, moderately priced, in-duct mounted mixed flow fan, with an excellent extraction rate all while running very quietly, then you should definitely consider getting the MF100T. As this model is incredibly easy to install, it comes as no surprise that this extractor fan has an average of 4.5 stars from over 1,500+ reviews online.

Where Should I Purchase This Unit?

Manrose MF100T Additional Specifications